产品标准 standard
本产品按GB12706《额定电压35KV铜芯、铝芯塑料绝缘电力电缆》标准生产，同时还可根据用户需要按******电工委员会推荐标准IEC、英国标准、德国标准及美国标准生产。The product is manufactured according to the standard of GB12706、IEC.BS,DIN and ICEA upon request.
适用范围 Applications
本产品适用于工频额定电压64/1KV及以下配电网或工业装置中固定敷设之用。
The product is suitable for use in power distribution lines or fixed installations with rated power- frequency voltage up to and including 0.6/1Kv.
使用特性 Operating characteridtles
·工频额定UO/U为0.6/1KV。
Rated power –frequency voltage UO/U为0.6/1KV。
电缆导体允许长期***高工作温度为90℃。
Max.permissible continuous operating temperature of conductor:90℃.
短路时（***长持续时间不超过5s）电缆导体的***高温度不超过250℃。
Max.short –circuit temperature of conductor shall not exceed 250℃(5s maximum duration ).
电缆敷设时环境温度应不低于0℃。
The ambient temperature under installation should not below 0℃.
电缆弯曲半径：不小于电缆外径的15倍。
The bending radius should not less than 15 times of cable diameter.
电缆的型号 Type of cable
| 型号 Type |
名称 Designation |
适用范围 Application |
| YJV |
铜芯交联聚乙烯绝缘聚氯乙烯外护套电力电缆 Copper conductor ,XLPE insulated ,PVC sheathed power cable |
室内、隧道、电缆沟内或直脉地下，能够承受一定的机械外力和一定的拉力。 For laying indoor , in tunnel, cable French, well or direct in ground , able to bear external mechanical forces and certain pulling force. |
| YJLV |
铝芯交联聚乙烯绝缘聚氯乙烯护套电力电缆 Aluminum conductor ,XLPE insulated ,PVC sheathed power cable |
| YJY |
铜芯交联聚乙烯绝缘聚乙烯外护套电力电缆 Copper conductor ,XLPE insulated ,PE sheathed power cable |
| YJLY |
铝芯交联聚乙烯绝缘聚乙烯护套电力电缆 Aluminum conductor ,XLPE insulated ,PE sheathed power cable | |
电缆的型号
| 型号 Type |
名称 Designation |
适用范围 Application |
| YJLW02-Z |
铜芯交联聚乙烯绝缘皱纹铝套聚氯乙烯外护套纵向阻水电力电缆 Copper conductor , XLPE insulated ,creasing-aluminum sheathed and PVC sheathed longitudinal-block-water power cable |
室内、隧道、电缆沟内或直埋地下，可在潮湿环境及地下水位较高的地方使用，能够承受一定的机械外力和一定的拉力 For laying indoors ,in tunnel, cable French, well or direct in ground , use in the damp place and in the high water table ,able to bear external mechanical forces and certain pulling force. |
| YJLLW02-Z |
铝芯交联聚乙烯绝缘皱纹铝套聚氯乙烯外护套纵向阻水电力电缆 Aluminum conductor , XLPE insulated ,creasing-aluminum sheathed and PVC sheathed longitudinal-block-water power cable |
| YJLW03-Z |
铜芯交联聚乙烯绝缘皱纹铝套聚乙烯外护套纵向阻水电力电缆 Copper conductor , XLPE insulated ,creasing-aluminum sheathed and PE sheathed longitudinal-block-water power cable |
| JLLW03-Z |
铝芯交联聚乙烯绝缘皱纹铝套聚乙烯外护套纵向阻水电力电缆 Aluminum conductor , XLPE insulated ,creasing-aluminum sheathed and PE sheathed longitudinal-block-water power cable |
| YJV |
铜芯交联聚乙烯绝缘聚氯乙烯外护套电力电缆 Copper conductor, XPLE insulated and PVC sheathed power cable |
室内、隧道及电缆沟内等场所，不能承受机械外力。 For laying indoors, In tunnel , cable trench,well or direct in ground,able to bear external mech- anical forces and certain pulling force. |
| YJLV |
铝芯交联聚乙烯绝缘聚氯乙烯外护套电力电缆 Aluminum conductor, XPLE insulated and PVC sheathed power cable |
| YJY |
铜芯交联聚乙烯绝缘聚乙烯外护套电力电缆 Copper conductor, XPLE insulated and PE sheathed power cable |
| YJLY |
铝芯交联聚乙烯绝缘聚乙烯外护套电力电缆 Aluminum conductor, XPLE insulated and PE sheathed power cable | |
生产范围Production Range of Cable
| 型号 Type |
芯数
No.of cores |
导体标称截面
Nominal cross-section of conductor mm2 |
| 铜导体 Copper conductor |
铝导体 Aluminum conductor |
1* |
|
YJV YJY
YJV22 YJV23 |
YJLV YJLY
YJLV22 YJLV23 |
2 |
1.5~800
2.5~800
10~800 |
YJV YJY
YJV22 YJV23
YJV32 YJV33 |
YJLV YJLY
YJLV22 YJLV23
YJLV32 YJLV33 |
3 |
1.5~300
2.5~300
2.5~300
10~300 |
YJV YJY
YJV22 YJV23
YJV32 YJV33
|
YJLV YJLY
YJLV22 YJLV23
YJLV32 YJLV33 |
4 |
1.5~400
2.5~400
2.5~400
10~400 |
YJV YJY
YJV22 YJV23
YJV32 YJV33
|
YJLV YJLY
YJLV22 YJLV23
YJLV32 YJLV33 |
3＋1 |
1.5~400
2.5~400
2.5~400
10~400 |
YJV YJY
YJV22 YJV23
YJV32 YJV33
|
YJLV YJLY
YJLV22 YJLV23
YJLV32 YJLV33 |
5 |
1.5~400
4.0~400
1.5~400
4.0~400
10~400 |
YJV YJY
YJV22 YJV23
YJV32 YJV33
|
YJLV YJLY
YJLV22 YJLV23
YJLV32 YJLV33 |
4＋1 |
1.5~400
2.5~400
1.5~400
2.5~400
10~400 |
YJV YJY
YJV22 YJV23
YJV32 YJV33
|
YJLV YJLY
YJLV22 YJLV23
YJLV32 YJLV33 |
3＋2 |
1.5~400
4.0~400
1.5~400
4.0~400
10~400 |
YJV YJY
YJV22 YJV23
YJV32 YJV33
|
YJLV YJLY
YJLV22 YJLV23
YJLV32 YJLV33 |
|
1.5~400
4.0~400
1.5~400
4.0~400
10~400 | |
*单芯铠装电缆仅用于直流系统，若用于交流系统，应采用非磁性材料铠装或隔磁措施。
*The armoured single-core cables are used for d.c. system only.As for a.c. system,non-magnetic armour material should be used,or a magnetic isolation shouls beapplied.
| | |
